Highlights from Light + Building 2018 – Part 4: KNX User Interfaces and Sensors
By Yasmin Hashmi, KNXtoday If your interest is in KNX user interfaces or sensors, there was plenty at Light + Building 2018 to tempt you. Switch designs were on show in a wide choice of styles and finishes with varying degrees of customisation possible. There was also a wide choice of dedicated stand alone sensors, […]
Highlights from Light + Building 2018 – Part 5: KNX Secure
By Yasmin Hashmi, KNXtoday In Parts 1, 2, 3 and 4 of this five-part series on highlights from the recent Light + Building show in Frankfurt, we presented a selection of KNX products and technologies ranging from new user interfaces, to HVAC, lighting and shading; system programming, servers, gateways, sensors and the IoT. The common […]
Highlights from Light + Building 2018 – Part 1: IoT, Home Automation, HVAC, Water Management, Lighting and Shading
By Yasmin Hashmi, KNXtoday Light + Building 2018 was a real treat for the KNX professional. There was something for everyone and so much on show from KNX manufacturers, service providers and the KNX Association, that our show report has been split into several parts, some of which have been published this month. In this […]
Highlights from Light + Building 2018 – Part 2: Simpler Design, Installation and Control
By Yasmin Hashmi, KNXtoday If you were looking for tools to make KNX system planning, installation and operation easier, Light + Building 2018 had plenty to show. In Part 2 of our show highlights, we look at a selection of products and technologies that aim to make system planning, programming and operation easier. Simpler planning […]
Light + Building 2018 Show Report: KNX Association Press Conference and Top Event
By Yasmin Hashmi, KNXtoday. The two main events during Light + Building 2018 that provided a great overview of how well KNX is progressing and what the KNX Assoication’s key messages are, were the press conference and the KNX Top Event. Global The KNX Assocation press conference kicked off with some impressive facts and figures […]
Trade Talk: Assisted Living – Preparing for Getting Old
By Simon Buddle, Future Ready Homes. Life speeds up as one gets older. In ’76, the long hot summer, I was twelve and it was indeed a very long and very hot summer. My only worries were if there might be a shopping trolley below the water under the bridge that I repeatedly jumped off, […]
Market Development: How Electricians can become Ultimate Smart Installers
By Julian Barkes, Bemco. As satellite and AV installations are displaced by IoT devices and an ever-expanding choice of new products and systems, the electrical contracting market has a fantastic opportunity to make up ground lost to the custom install world. This is because nowadays, a wider range of installer skill sets is needed in […]
Trade Talk: DALI 2 and what it Means for KNX
By Simon Buddle, Future Ready Homes. I think I might have missed the fanfare heralding the arrival of DALI 2. Or is it just that it has flown under the radar somewhat, like military HALO troops whose goal is to drop through the radar screen unnoticed, or, at worst just as a single blip on […]
Overview: Cooperating to Grow the Influence of Home Control with End-users
By Mark Warburton, Ivory Egg. I saw a great post on LinkedIn recently, asking for recommendations for a smart home solution. Being from the building industry, the person who posted obviously had a lot of contacts that are able to offer some form of A/V or building control solution. Queue a load of replies from […]
Show Report: KNX at ISE 2018 Bursting at the Seams
By Simon Buddle, Future Ready Homes. The RAI exhibition centre is now officially full to capacity. The Integrated Systems Europe Show filled every hall and hallway. It even created a new hall on the plaza in front of the main halls. Hall 15 is open for business. In amongst the projectors, displays and holograms were […]