ZVEH Presents eHaus Powered by KNX at Light+Building 2014
At light+building, ZVEH will again present its eHaus, powered by KNX. At the Light+Building 2014, a new, even more modern edition of the the eHaus will be shown in Hall 8.0, Stand J60. Energy Efficiency and Energy Management in Focus The eHaus is a 100-square-foot model home that is a prime example of networked, intelligent […]
KNX Becomes REST API Compliant With ETSI M2M Support
KNX, the leading open standard for Home and Building Control now provides a Web-based (REST) development interface through its complete integration with the ETSI M2M Release 2 architecture. With the simple RESTful API outlined in ETSI TR 102 966, M2M Application developers and cloud services can access a large number of fieldbus and automation protocols […]
LOYTEC Offers the LKNX-300 KNX Interface for its Automation Server and Room Controller
The KNX interface LKNX-300 allows the integration of KNX (EIB) devices into the LINX-12x/15x/22x Automation Server, LROC-100/150 Room Controller, and LGATE-95x Universal Gateway. The LKNX‑300 interface must be connected to the EXT port on the LINX automation server, L-ROC Room Controller or the LGATE-950 Universal Gateway. Power is supplied to the KNX interface via the […]
4-noks Offers ZB-Connection KNX-ZBC Bridge
ZB-Connection offers the KNX-ZBC bridge between the KNX bus and RS485 Modbus-RTU world. Now, thanks to this device all the ZB-Connection sensors are more accessible to KNX systems installers and integrators. It can be used in combination with devices such as environmental sensors, energy meters, E/S, etc. And with KNX-ZBC it is possible to install […]
Best Practice: Global Control and Remote Access
By Simon Buddle, SMC. It’s 05:00, I’m tired, and I have a long drive ahead of me. Dorset is several hours away, even on quiet roads. Time to load myself and a mug of hot coffee into the car. It’s a cold, miserable day and dawn is still two hours further down my route. Keeping […]
Solutions: IP and KNX – Bringing You up to Speed
By Mark Warburton, Ivory Egg. I am often asked what the limitations of KNX are and whether it is an out-of-date system, especially as the protocol was initially laid down over 20 years ago. One of the most used figures in this debate is the relatively slow baud rate that KNX employs (9600bps) and the […]
Enertex Offers KNXnet/IP Router for KNX Home Automation
The KNXnet / IP router (3TE) supports up to five KNXnet / IP tunnel connections. Through its integrated display all the important configuration parameters are always in view. This allows for quick and easy commissioning. The IP address of the Fast Ethernet connection can be done manually via the ETS or can be configured automatically […]
Somfy Offers Animeo KNX IP Wireless Interface
Interface between WLAN and the KNX bus The KNX IP Interface wireless is a WLAN interface to the KNX/ EIB bus. It can be used instead of a USB or wire-bound IP inter- face, e.g. for ETS3. Utilising the wireless technology the installer can now move unhindered throughout the building. The KNX IP Interface wireless […]
Best Practice: The Case for Integrated Heating Control
By Simon Buddle, SMC. Some people don’t know how lucky they are. I come from a small market town right in the middle of Nowhere. It has few redeeming features, except perhaps seeing the ‘Welcome to Nowhere’ sign beating a hasty retreat in the car’s rear view mirror. A line from the film ‘Paint Your […]
DGLogik Announces KNX Support for its DGBox Appliance Platform
Making the most useful protocols available to our clients is one of many deliverables of DGLogik. With tremendous success in building automation throughout Europe, the DGBox now offers the KNX Protocol! As DGLogik expands around the globe, we will be continuing to announce the latest and greatest in order to further minimize engineering and development […]