The e-magazine for KNX home & building control

Eelectron Shows KNX DIN Rail Module and Glass Touch Switch at Light+Building 2014

Light and Building 2014 – Hall 11.1 – Stand C32

BO08A01KNX – 8 Output Universal Module

The DIN Rail 8 Output Module BO08A01KNX is an EIB/KNX DIN rail mounting device useful to interface commands (e.g. push buttons) or loads (e.g. lamps) for any kind of applications. Device with 8 outputs on board can be configured:

-Each output can be configured independently for load control (R1 to R8)
-Each output can be configured independently for ON / OFF or continuous switching (PWM) for Electric valves (solenoid actuators) (EV1 to EV8)
-Outputs can be configured in pairs for the management of roller shutters and blinds;
up to 4 channels (Channels A to D)
-Outputs can be configured in pairs for management of Motor Reductor or for solenoid
valves with 3-point control or for ventilating grille; up to 4 channels (Channels A to D)
-Fan Coil Actuator for 2/4 pipes systems for Heating / Cooling with 3 speed motors)
(uses relay from 1 to 5)

Glass Touch Switch KNX 4 Channels

The Glass Touch Switch KNX of Eelectron SpA is available in 3 colors (White, Silver
& Black). The product includes 5 different models: 3, 6, 8 channels in 3 module inwall box and 4, 8 channels in 4 module inwall box.

Every product of the line has signaling led for channels an can be installed in vertical
or horizontal inwall boxes.

The pressure of the glass switch can be long or short and can command sequences. Color, icons and text customization for home and office settings is possible. Fully programmable with ETS software.

www.eelectron.com

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

LUXA 103 KNX presence detectors


LUXA 103 KNX presence detectors
LUXA 103 presence detectors with a round detection area for individual and open-plan offices, meeting and storage rooms, cellars ...