The e-magazine for KNX home & building control

I-Luxus Offers EPHESUS KNX Room Controller with Thermostat

EPHESUS KNX Room controllers have a stylish and simple design produced from zinc alloy. The dyeing process was done with its unique craftsmanship. Our devices, which are produced in two models with two and four buttons, can be easily mounted to the universal round or square plaster cases.

At first sight, it is perceived as a KNX based thermostat controller. However, it is not only a thermostat, but also a KNX based room controller. The EPHESUS KNX Room Controller features a simple interface design with temperature, humidity and ambient light sensors. This ensures a high level of comfort and energy efficiency in your environment. With a single touch you can comfortably control air conditioning, lighting, curtains / blinds, activate / deactivate sound systems or scenario management.

Thus, a single platform allows you to control the most important functions needed in the room. In addition, all functions can be controlled remotely via the EOZ Touch Panel, smartphone or tablet (iOS & android).

Main Technical Specifications:

  • LCD touch button
  • Zamak material finishing
  • Handmade dyeing
  • Air conditioning by Temperature / Humidity sensor
  • Ambient lighting sensor
  • 3 different color variations of status lighting

EPHESUS KNX Room Controller – 2 Gang

The EPHESUS 2 Gang KNX Room Controller Thermostat with capacitive touch screen can be used for switching, dimming, shutter and blind control. HVAC functionalities such as cooling and heating or fan coil control are supported. EPHESUS KNX Room Controller displays the values from the embedded temperature and humidity sensor on the LCD. Additionally, embedded ambient sensor and light sensor can be added. All parameters can be changed using ETS and send periodically to the KNX Bus.

EPHESUS KNX Room Controller – 4 Gang

The I-Luxus 4 Gang KNX Thermostat with capacitive touch screen can be used for switching, dimming, shutter and blind control. HVAC functionalities such as cooling and heating or fan coil control are supported. Values from the embedded temperature and humidity sensor are displayed on the LCD screen. Additionally, embedded ambient sensor and light sensor can be added. All parameters can be changed using ETS and send periodically to the KNX Bus.

en.i-luxus.de

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

Firmware Update for LS TOUCH


Firmware Update for LS TOUCH
A device for comprehensive room control: The JUNG LS TOUCH combines the intuitive operation of KNX functions with a touch ...

Integrate Audio into KNX


Integrate Audio into KNX
KNX installers can add multi-room control of a Triad audio system on their projects through the Control4 platform. Snap ...

Steinel IR Quattro MICRO KNX Presence Detector


Steinel IR Quattro MICRO KNX Presence Detector
The 360-degree IR Quattro MICRO KNX presence detector from STEINEL is practically invisible thanks to its low installation height ...

Interra KNX AC Gateway


Interra KNX AC Gateway
Interra KNX AC Gateway: Smart Climate Control Solutions The Interra KNX AC Gateway offers an innovative solution for climate control ...

Steinel IR Quattro MICRO KNX Presence Detector


Steinel IR Quattro MICRO KNX Presence Detector
The 360-degree IR Quattro MICRO KNX presence detector from STEINEL is practically invisible thanks to its low installation height ...