The e-magazine for KNX home & building control

Eelectron Announces Availibility of 3025 Range with 55×55 KNX Switch and 3.5-inch Square Touch Panel

Eelectron SpA is delighted to introduce the new 3025 range including a 55×55 KNX switch in five different finishes: glass, metal, wood, stone and plastic. To complete the range, the new square plate for the 3.5″ Touch Panel with the same finishes as the 55×55 switch, has been released this month.

eelectron-3025-range-knx

NEW – 3025 – 55×55 KNX Switch (4 channels + thermostat)

SB40AxxKNX is a KNX tactile 4 channel push button switch which can be configured to manage on/off commands, dimming, shutters and venetian blinds control, scene recall and control, sequences of 3 objects, etc. The device includes a 2 stage Room Temperature Controller with integrated PI to control heating and cooling equipment, valves, 2- and 4-pipe fan coils, etc.

The switch has a rear connector (2 poles) configurable as digital or analogue input; making it possible to connect a NTC temperature probe (Eelectron codes TS01A01ACC or TS01B01ACC – not included) to have a direct temperature measurement. SB40A01KNX has an RGB LED bar on the front side in order to visualize feedback or other values available over the KNX bus. SB40A01KNX is intended to be used in a British box, German box or Italian 2-module box. The switch is also equipped with a KNX communication interface.

Order Codes:

55x55-knx-switch-order-codes

NEW – 3025 – Touch Panel 3.5” Square

The Touch Panel is equipped with a 3.5-inch coloured display, and dimming, status, values, lighting, shutters and timers are controlled and password-protected when needed. Using the embedded temperature sensor and the embedded room temperature controller function, it is possible to manage valves, fancoil or other HVAC equipment.

RGB coloured LED or lights are controlled with dedicated control elements and a proper KNX interface (DMX, 1-10V and DALI are also available). The Touch Panel includes a number of pre-programmed logic functions including control of electrical loads with automatic power-off priority (this feature is available in combination with the Eelectron KNX power measuring device). Available in various colours and finishes, the Touch Panel is based on Linux OS but it can be programmed using only ETS without any additional software. The Touch Panel is also equipped with a KNX communication interface.

Order Codes:

3025-touch-panel-order-codes

Pricing and Availability

Products are in stock in our warehouse and in the UK with our partner Home of Technologies.

www.eelectron.com
3025.eelectron.com

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

Interra iX3 4” Touch Panel


Interra iX3 4” Touch Panel
A next-generation room controller that transforms environmental management. With integrated sensors for temperature, humidity, brightness, and air quality (optional ...

Clever solution for existing KNX properties


Clever solution for existing KNX properties
Anyone who built their home over three decades ago with the European installation bus can now upgrade it with modern ...