The e-magazine for KNX home & building control

Jung Presents KNX F 50 Compact Room Controller

A powerful room controller
A champion in function and convenience

The new KNX F 50 compact room controller quickly shows you everything it can do. It has a choice of four options for determining the room temperature alone: through the built-in temperature sensor for a start; then through the temperature sensor of a connected extension module; thirdly, through an optionally connected remote sensor; and finally, through the temperature sensor of any other KNX device via a 2-byte float message. Moreover, the actual temperature may be obtained from a combination of the named sources shown on the display of the room controller.

Temperature control in parallel in two rooms

The F 50 room controller provides exclusive performance in terms of function extension. With its two integrated temperature regulators, the device is able to control the temperature in two rooms in parallel. Firstly in the location where the compact room controller has been installed and also, with the aid of a connected extension module, to an adjoining room – the hallway perhaps. Connection to extension modules can be realised in a flexible way. This enables functions to be extended simply, quickly and inexpensively. As the extension modules can be installed at a distance of up to 30 metres, there is unlimited availability of all the KNX functions also (for example) in the room next door. This includes an independent temperature control.

Convenient operation through well-thought-out device technology

This new JUNG device also scores well through its intuitive ease of operation. A convincing example of this is its large back-lit liquid crystal display. The most important values and functions are presented on the display, which can be read easily from any angle. The user also has the option to individually select the key symbols that correspond with each function during the programming phase. The allocation of functions can be further improved with keys labelled with the Graphic Tool. The same applies for the RGB status LEDs. All the keys of the room controller can alternatively be assigned with push-button sensor or regulator functions.

The KNX Compact room controller is available in a 2-gang and 4-gang version. Available in the same design as of the AS, A, CD, and LS ranges, it harmoniously fits to the remaining electrical installation.

By connecting extension modules to the compact room controller, functions may be added to the unit as required. What is typical of the F 50 family: the extension modules may be installed in a distance of up to 30 m.

www.jung.de/en

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

Products of the month

KNX Switch Actuators Upgrade


KNX Switch Actuators Upgrade
The new ABB ETS App Version 1.1 has a pack of new features empowering the switch actuator range further ...

thePixa Optical Presence Detector


thePixa Optical Presence Detector
Theben's thePixa KNX optical presence detector detects how many people are in a room and where exactly they are ...

Conventional becomes smart


Conventional becomes smart
No dirt, no noise, no bus line – the classic electrical installation is sufficient: the new JUNG KNX RF push-buttons ...

AVE’s KNX room controller


AVE’s KNX room controller
Ideal for home and hotel, AVE Room Controller is a high-design solution with OLED display and touch controls, which ...