The e-magazine for KNX home & building control

DINUY Launches New KNX Multifunction Actuators

DINUY launches its new KNX Multifunction Actuators with 8 or 16 switching or blind/shutter control output channels and 12 or 23 binary/analog Inputs.

16 Channel Multifunction KNX Switching Actuator – IT KNT 016

  • KNX Multifunction Actuators that can work as: 16-channel Switching Actuator or 8-channel Blinds/Shutters Actuators.
  • High load capacity, with 16A built-in relays, as well as a zero-crossing-point control, which allows switching very high loads, even capacitive type.
  • Incorporate 23 Inputs: 16-Binary Inputs + 7-Binary/Analog Inputs
  • These inputs can be independently parameterized through the ETS Software:
    • Binary Input: allows the connection of a conventional voltage-free binary sensor or switch.
    • Analog Input: allows the connection of a DINUY temperature probe (ST KNT 001 or ST KNT 002).
  • Incorporates a front keypad for independent manual control of each output, as well as status indicator LEDs.
  • Allows to enable and configure up to 7 independent Heating and / or Cooling Thermostats.
  • It incorporates 16 Logic Functions, Centralized Control, Scenes, Time Function, etc.
  • Possibility of connecting different phases in each output channel.
  • Integrated Bus Coupling Unit (BCU).
  • DIN-rail mounting, 8 modules wide.
  • Programming and commissioning via ETS5 or later versions.

8 Channel Multifunction KNX Switching Actuator – IT KNT 008

  • KNX Multifunction Actuators that can work as 8-channel Switching Actuator or 4-channel Blinds/Shutters Actuators.
  • High load capacity, with 16A built-in relays, as well as a zero-crossing-point control, which allows switching very high loads, even capacitive type.
  • Incorporate 12 Inputs: 8-Binary Inputs + 4-Binary/Analog Inputs
  • These inputs can be independently parameterized through the ETS Software:
    • Binary Input: allows the connection of a conventional voltage-free binary sensor or switch.
    • Analog Input: allows the connection of a DINUY temperature probe (ST KNT 001 or ST KNT 002).
  • Incorporates a front keypad for independent manual control of each output, as well as status indicator LEDs.
  • Allows to enable and configure up to 4 independent Heating and / or Cooling Thermostats.
  • It incorporates 8 Logic Functions, Centralized Control, Scenes, Time Function, etc.
  • Possibility of connecting different phases in each output channel.
  • Integrated Bus Coupling Unit (BCU).
  • DIN-rail mounting, 4 modules wide.
  • Programming and commissioning via ETS5 or later versions.

dinuy.com/en

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

Products of the month

KNX Switch Actuators Upgrade


KNX Switch Actuators Upgrade
The new ABB ETS App Version 1.1 has a pack of new features empowering the switch actuator range further ...

thePixa Optical Presence Detector


thePixa Optical Presence Detector
Theben's thePixa KNX optical presence detector detects how many people are in a room and where exactly they are ...

Conventional becomes smart


Conventional becomes smart
No dirt, no noise, no bus line – the classic electrical installation is sufficient: the new JUNG KNX RF push-buttons ...

AVE’s KNX room controller


AVE’s KNX room controller
Ideal for home and hotel, AVE Room Controller is a high-design solution with OLED display and touch controls, which ...