The e-magazine for KNX home & building control

Elsner Elektronik Announces KNX eTR 101 Room Temperature Controller

KNX eTR 101 is a heating controller for the KNX building bus system. The switch-sized control unit is placed on site in the room. The controller automatically ensures the desired room temperature and enables individual readjustment via touch surfaces. The simple user interface allows use in both private and commercial areas, especially in hotels, where the user wants to adjust the room temperature quickly and intuitively. “Plus” and “minus” for setting are understood internationally and are supplemented by a temperature value display. The real glass surface is both elegant and durable. The design language matches many current furnishing styles.

KNX eTR 101 measures the temperature on site and controls the heating and, if necessary, the cooling via integrated PI controllers. Single-stage and two-stage systems can be controlled. All settings such as connected systems and target temperatures for the operating modes Comfort, Standby, Eco and Building Protection (according to KNX-HVAC standard) are made in the KNX application of the room temperature controller. Here it is also determined whether the measured value, target value or the basic setpoint shift is displayed on the device and the setting range is limited. This allows the KNX eTR 101 to be adapted to large as well as small projects.

Share on facebook
Share on twitter
Share on linkedin


JUNG area / line coupler

JUNG area / line coupler
The JUNG area / line coupler connects two KNX lines while retaining electrical isolation. Across publicly accessible areas, such as corridors ...