The e-magazine for KNX home & building control

Viatron Offers KNX IR Linker for Integrating IR Control with KNX Devices

The KNX IR Linker from Viatron is a solution for combining infrared devices with the KNX bus system.

The KNX IR Linker allows KNX devices such as switches, dimmers and blinds to be controlled via an infrared signal. In addition, the controlling of AV devices such as TV, blu-ray player etc., via the KNX bus system is also possible.

All common infrared protocols are supported. Up to 22 switches, seven dimmers and seven blinds can be controlled and a total of 64 infrared signals can be emitted.

The KNX IR Linker can be configured very easily and innovatively via the KNX bus system and is supported by KNbriX from ITK Engineering.

www.viatron.de

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

New Interra iSwitch+ Series


New Interra iSwitch+ Series
New Interra iSwitch+, the improved version of the legendary thermostatic KNX switch series of Interra takes attention with its clear ...

KNX Dali-Gateway Colour with KNX Secure


KNX Dali-Gateway Colour with KNX Secure
Smart and secure: DALI in KNX The new JUNG KNX DALI Gateway Colour acts as an interface between a KNX ...

ESYLUX presence detector PD-C 360i/8 mini KNX BK


ESYLUX presence detector PD-C 360i/8 mini KNX BK
High-contrast accents are one of the current colour trends in interior design, and anthracite to black ambiences also characterise ...