The e-magazine for KNX home & building control

Elaborated Networks offers BlitzART surge protection modules for bus systems

The BlitzART multi-level surge protection modules are available for KNX-TP, KNX auxiliary voltage, Modbus RTU, DMX, RS-485, RS-232, 1-Wire, Loxone 24V, Loxone Tree, Loxone Link.

They offer very low protection levels from 10 V and extremely fast response from 40 picoseconds.

The KNX / auxiliary voltage module features:

  • 1,000 amps (8/20 µs)
  • Type 3 / Pulse class C2
  • Two-stage arrester
  • 5 bidirectional protective paths
  • Protection level < 220 V (sw / rt)
  • Capacity 1 nF

elabnet.de/en/blitzart

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

Firmware Update for LS TOUCH


Firmware Update for LS TOUCH
A device for comprehensive room control: The JUNG LS TOUCH combines the intuitive operation of KNX functions with a touch ...

Integrate Audio into KNX


Integrate Audio into KNX
KNX installers can add multi-room control of a Triad audio system on their projects through the Control4 platform. Snap ...

Steinel IR Quattro MICRO KNX Presence Detector


Steinel IR Quattro MICRO KNX Presence Detector
The 360-degree IR Quattro MICRO KNX presence detector from STEINEL is practically invisible thanks to its low installation height ...

Interra KNX AC Gateway


Interra KNX AC Gateway
Interra KNX AC Gateway: Smart Climate Control Solutions The Interra KNX AC Gateway offers an innovative solution for climate control ...

Steinel IR Quattro MICRO KNX Presence Detector


Steinel IR Quattro MICRO KNX Presence Detector
The 360-degree IR Quattro MICRO KNX presence detector from STEINEL is practically invisible thanks to its low installation height ...