Calao Systems launches two new products for building and home automation powered by Atmel AT91SAM9G20 ARM9 processor clocked at 400 MHz housed in a DIN Rail enclosure.
HABA-KNX-EXPLORER and HABA-KNX-LITE are programmable controllers for the home and building automation market. They are characterized by ease of use, flexible customisation (including front panel), low power consumption (less than 5W), fully « Open Source» software (U-Boot, Linux, Eibd, LinKnx, KnxWeb…) and free development tools (BuildRoot).
HABA-KNX-EXPLORER Specifications:
– ARM926EJ-S @ 400MHz,
– 256MB NAND Flash,
– 128MB SDRAM,
– Micro-SD,
– RTC battery backup,
– 2x Ethernet 10/100Mbits,
– 2x USB Host FS (12Mbits),
– 1x USB Device FS (12Mbits),
– 1x KNX/TP1 (isolated),
– 1x RS-232 (isolated),
– 2x RS-485 (isolated),
– 1x RF Expansion Connector,
– 1 Din Rail 9 units,
– 1 DC In 9-36V.
HABA-KNX-LITE Specifications:
– ARM926EJ-S @ 400MHz,
– 256MB NAND Flash,
– 128MB SDRAM,
– 16Mbit Serial Flash,
– 2Kbit EEPROM with MAC address,
– 1x Micro-SD,
– 1x RTC with battery backup,
– 1x Ethernet 10/100Mbits,
– 2x USB Host FS (12Mbits),
– 1x USB Device FS (12Mbits),
– 1x KNX/TP1 (isolated),
– 1x RF Expansion Connector,
– 1 Din Rail 6 units,
– 1 DC In 9-36V,
– Temperature range -20°C to +70°C.
Target applications include KNXpc (EIB/KNX Controller), smart grid controller, energy meters management, datalogger, time server, web server, IP/KNX router, GSM/GPRS, WiFi, BT Gateways,Wired to Wireless Bridges (MBUS, ZigBee, KNX/RF, 6LowPan, LoRa,…), repeaters, and so on. To achieve all these features, the company can also provide various expansion boards.
