The e-magazine for KNX home & building control

Weinzierl Offers the KNX IP Router 750

The KNX IP Router forwards telegrams between different lines via LAN (IP) as a fast backbone. With it this device compensates the EIB/KNX line coupler. The KNX IP Router can also be used in ETS3 and ETS4 as a programming interface. There are two ways to assign an IP-address, get the IP-address from a DHCP-server or configure it with ETS (as ETS parameter). It has an external 12V to 24V Power Supply or can alternatively be powered via Power-over-Ethernet (IEEE 802.3af).

Mechanical data:
Housing: plastic
DIN rail mounted device, width: 2 TE

Controls:
Learning key for EIB/KNX

Indicators:
Lerning LED (red)
Signal LED (green) for EIB/KNX
Signal LED (green) for LAN

Ethernet:
10BaseT (10Mbit/s)

Power supply:
External power supply 12-24V AC or 12-30V DC
Alternative: ‘Power-over-Ethernet’
Power consumption: < 800 mW Connectors: EIB/KNX connector LAN RJ-45 socket Screw connector for power supply www.weinzierl.de

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

Products of the month

KNX Switch Actuators Upgrade


KNX Switch Actuators Upgrade
The new ABB ETS App Version 1.1 has a pack of new features empowering the switch actuator range further ...

thePixa Optical Presence Detector


thePixa Optical Presence Detector
Theben's thePixa KNX optical presence detector detects how many people are in a room and where exactly they are ...

Conventional becomes smart


Conventional becomes smart
No dirt, no noise, no bus line – the classic electrical installation is sufficient: the new JUNG KNX RF push-buttons ...

AVE’s KNX room controller


AVE’s KNX room controller
Ideal for home and hotel, AVE Room Controller is a high-design solution with OLED display and touch controls, which ...