The e-magazine for KNX home & building control

KNX Association Confirms Larger Booth Space for ISE 2016

Once again the KNX Association participated at Integrated Systems Europe 2015 (ISE 2015) between the 10th and 12th of February at the RAI in Amsterdam in cooperation with KNX Members.

The fair was preceded by the Smart Building Conference on the 9th of February, where KNX was referenced as the ideal system for smart buildings in most presentations.

During the fair, seven KNX Members were present at the booth: dakanimo GmbH (Germany), Elsner Elektronik GmbH (Germany), EMT Controls (Turkey), Pulsar Engineering (Italy), Simon S.A. (Spain), tci GmbH (Germany) and TENSE Top Design Switches (Belgium).

The KNX School area at the booth was well-visited during the presentations about KNX and the integration of audio and video. Furthermore, KNX also presented solutions both at the residential and commercial solutions theatres.

As the fair was very successful for KNX and its Members, the decision was made to be present again next year with an even bigger booth space than the 108 square meter booth of 2015.

We hope to see you again next year at Amsterdam!

www.knx.org

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

JUNG area / line coupler


JUNG area / line coupler
The JUNG area / line coupler connects two KNX lines while retaining electrical isolation. Across publicly accessible areas, such as corridors ...