The e-magazine for KNX home & building control

ATV Systems Offers KNX Lab Portable Training Systems

KNX Lab 1 – A condensed educational system KNX technology

Discover KNX Lab 1, a complete training system and mobile standing in a suitcase. It allows a complete pedagogical approach to the principles of a facility managed by the KNX protocol. Our educational system KNX Lab 1 was designed around the communications protocol KNX home automation. Concentrated in a suitcase, it will keep you mobile and take with you on your practical work. KNX Lab, you will cover the fields of application of this global standard for technical management of residential and commercial buildings.

It will allow you to explore the possibilities of this standard compatibility and interoperability in the single sectors of automation to the actual installation. Ideal for the discovery, study and implementation of a home automation system (heating, lighting, motorized opening) whose management and control is via the KNX communication protocol.

• Dimensions: H230 x L600 x P500 mm
The block in this case is the ground floor of a house.

COMPOSITION OF THE SUITCASE
• General Protection 30mA circuit breaker,
• A bus supply 160mA 32 participants,
• USB interface (for connection to the KNX bus a programming device (PC)
• 1 actuator switching outputs 4 “lighting”
• 1 dimming actuator outputs 300W 2 “lighting”
• 2 dual elements (push buttons).

TYPE OF LIGHTING
• 4 LEDs equipped with an LED lamp type
• 2 spotlights recessed halogen type lamp with 42W.

KNX LAB 2 – A condensed educational system KNX technology

Discover KNX Lab 2, a complete training system and mobile standing in a suitcase. It allows a complete pedagogical approach to the principles of a facility managed by the KNX protocol. Our educational system KNX Lab 2 was designed around communication protocol KNX home automation. Concentrated in a suitcase, it will keep you mobile and take with you on your practical work. KNX Lab, you will cover the fields of application of this global standard for technical management of residential and commercial buildings.

It will allow you to explore the possibilities of this standard compatibility and interoperability in the single sectors of automation to the actual installation. Ideal for the discovery, study and implementation of a home automation system (heating, lighting, motorized opening) whose management and control is via the KNX communication protocol.

• Dimensions: H230 x L600 x P500 mm

COMPOSITION OF THE SUITCASE
• General Protection 30mA circuit breaker,
• 1 power supply of 160mA bus 32 participants,
• 1 USB interface for connection to the KNX bus a programming device
• 1 actuator switching outputs 4 “fixed lighting”
• 1 dimming actuator outputs 300W 2 “lighting control”
• 1 actuator for motorized opening 2 outputs “shutter”
• 1 switch actuator 2 outputs “electric heating”
• 2 dual elements, a single control element,
• 1 room thermostat with display,
• 1 presence detector and brightness control.

PARTIES Operatives
• various operative part 1 lighting
• 1 operative part with electric heating,
• 1 operative part with electric shutters.

KNX LAB 2 LIGHT – A condensed educational system KNX technology

Discover KNX Light Lab 2, a complete training system and mobile standing in a suitcase. It allows a complete pedagogical approach to the principles of a facility managed by the KNX protocol. Our educational system KNX Lab 2 was designed around communication protocol KNX home automation. Concentrated in a suitcase, it will keep you mobile and take with you on your practical work. KNX Lab, you will cover the fields of application of this global standard for technical management of residential and commercial buildings.

It will allow you to explore the possibilities of this standard compatibility and interoperability in the single sectors of automation to the actual installation. Ideal for the discovery, study and implementation of a home automation system (heating, lighting, motorized opening) whose management and control is via the KNX communication protocol.

• Dimensions: H230 x L600 x P500 mm

COMPOSITION OF THE SUITCASE
• General Protection 30mA circuit breaker,
• 1 power supply of 160mA bus 32 participants,
• 1 USB interface for connection to the KNX bus a programming device
• 1 actuator switching outputs 4 “fixed lighting”
• 1 dimming actuator outputs 300W 2 “lighting control”
• 1 actuator for motorized opening 2 outputs “shutter”
• 1 switch actuator 2 outputs “electric heating”
• 2 dual elements, a single control element,
• 1 room thermostat with display,
• 1 presence detector and brightness control.

www.atv-systemes.com

Share on facebook
Share
Share on twitter
Tweet
Share on linkedin
Share

SPONSORS

Schneider's new KNX Push Button with dynamic labeling


Schneider's new KNX Push Button with dynamic labeling
Schneider Electric’s new KNX Push Button has an attractive display that enables digital labeling with text and symbols. System ...

How KNX Smart Home reduces energy consumption and increases comfort


How KNX Smart Home reduces energy consumption and increases comfort
The Dutch housing company Woonborg is building 36 flats based on the strict NOM (Zero-on-the-Meter) standard. To ...

Update of JUNG Actuators


Update of JUNG Actuators
The JUNG KNX switching and blind actuators have received a firmware update, which brings new features and simplified initial commissioning ...

AVE’s KNX Room Controller


AVE’s KNX Room Controller
Ideal for home and hotel, AVE Room Controller is a high-design solution with OLED display and touch controls, which ...